Liquid deposition patterning of conducting polymer ink onto hard and soft flexible substrates via dip-pen nanolithography

Ink formulations and protocols that enable the deposition and patterning of a conducting polymer (PEDOT:PSS) in the nanodomain have been developed. Significantly, we demonstrated the ability to pattern onto soft substrates such as silicone gum and polyethylene terephthalate (PET), which are materials of interest for low cost, flexible electronics. The deposition process and dimensions of the polymer patterns are found to be critically dependent on a number of parameters, including the pen design, ink properties, time after inking the pen, dwell time of the pen on the surface, and the nature of material substrate. By assessing these different parameters, an improved understanding of the ability to control the dimensions of individual PEDOT:PSS structures down to 600 nm in width and 10-80 nm in height within patterned arrays was obtained. This applicability of DPN for simple and nonreactive liquid deposition patterning of conducting polymers can lead to the fabrication of organic nanoelectronics or biosensors and complement the efforts of existing printing techniques such as inkjet and extrusion printing by scaling down conductive components to submicrometer and nanoscale dimensions.     

Selective Capture and Collection of Live Target Cells Using a Photoreactive Silicon Wafer Device Modified with Antibodies via a Photocleavable Linker

A device for the capture and recollection of live target cells is described. The platform was a silicon (Si) wafer modified with an anti-HEL antibody (anti-HEL-IgG, HEL = hen egg lysozyme) through a photocleavable 3-amino-3-(2-nitrophenyl)propionic acid (ANP) linker. The modification processes of the Si wafer surface were monitored by Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) and fast-scanning atomic force microscopy (FS-AFM). The attachment of IgG and its release reaction on the Si surface via the photochemical cleavage of the ANP linker were observed directly by FS-AFM. The results of an enzyme-linked immunosorbent assay (ELISA) indicated that the photorelease of the complex of anti-HEL-IgG with the secondary antibody-alkaline phosphatase hybrid (secondary IgG-AP) from the Si surface occurs with minimum damage. Furthermore, it was possible to collect SP2/O cells selectively that express HEL on their cell membranes (SP2/O-HEL) on the Si wafer device. Photochemical cleavage of the ANP linker facilitated the effective release of living SP2/O cells whose viability was verified by staining experiments using tripan blue. Moreover, it was possible to reculture the recovered cells. This methodology represents an effective strategy for isolating intact target cells in the biological and medicinal sciences and related fields.     

Method validation by interlaboratory studies of improved hydrophilic oxygen radical absorbance capacity methods for the determination of antioxidant capacities of antioxidant solutions and food extracts

Hydrophilic oxygen radical absorbance capacity (H-ORAC) is a method for evaluating antioxidant capacities of solutions of hydrophilic compounds. In this study, we improved the original method for H-ORAC determination, and evaluated the precision of the two improved methods (methods A and B) by interlaboratory studies using 5 antioxidant solutions and 5 food extracts as test samples. An interlaboratory study of method A, in accordance with the harmonized protocol, demonstrated satisfactory performance (intermediate precision relative standard deviations (RSD(int)) ranging from 4.6 to 18.8%; the reproducibility relative standard deviations (RSD(R)) ranging from 7.0 to 21.1%, and the HorRat values ranging from 0.40 to 1.93). However, methodological problems remained, and a further improved method, method B, was thus developed. An interlaboratory study of method B by 5 participating laboratories showed better intermediate precision and reproducibility (RSD(int) and RSD(R) ranging from 1.8 to 9.4%, and from 4.4 to 13.8%, respectively), and all HorRat values for the test samples were less than 1.3, suggesting good performance for the H-ORAC measurement.     

Development of an electrochemical cholesterol sensor system for food analysis

In this article, we report on a food-cholesterol monitoring sensor based on a non-enzymatic approach. Amorphous and single-crystal gold electrodes were modified with an alkanethiol self-assembled monolayer to quantify it by voltammetry. We first discuss the basic characteristics of these sensors and provide more information about the instrument developed by JSK Co. This instrument is a battery-operated handheld voltammetric analyzer, which mounts a sensor chip to monitor cholesterol contents in food samples. The sensor showed excellent linearity with the cholesterol concentration; egg-yolk samples were analyzed to give an excellent agreement between the values obtained by the sensor (1.4 mM) and chromatography (1.1 mM).     

One‐Handed Helical Screw Direction of Homopeptide Foldamer Exclusively Induced by Cyclic α‐Amino Acid Side‐Chain Chiral Centers

Chiral cyclic α,α‐disubstituted amino acids, (3S,4S)‐ and (3R,4R)‐1‐amino‐3,4‐(dialkoxy)cyclopentanecarboxylic acids ((S,S)‐ and (R,R)‐Ac₅c^dOR; R: methyl, methoxymethyl), were synthesized from dimethyl L ‐(+)‐ or D ‐(?)‐tartrate, and their homochiral homoligomers were prepared by solution‐phase methods. The preferred secondary structure of the (S,S)‐Ac₅c^dOMe hexapeptide was a left‐handed (M) 3₁₀ helix, whereas those of the (S,S)‐Ac₅c^dOMe octa‐ and decapeptides were left‐handed (M) α helices, both in solution and in the crystal state. The octa‐ and decapeptides can be well dissolved in pure water and are more α helical in water than in 2,2,2‐trifluoroethanol solution. The left‐handed (M) helices of the (S,S)‐Ac₅c^dOMe homochiral homopeptides were exclusively controlled by the side‐chain chiral centers, because the cyclic amino acid (S,S)‐Ac₅c^dOMe does not have an α‐carbon chiral center but has side‐chain γ‐carbon chiral centers.     

FMO‐MD Simulations on the Hydration of Formaldehyde in Water Solution with Constraint Dynamics

Full‐quantum mechanical fragment molecular orbital‐based molecular dynamics (FMO‐MD) simulations were applied to the hydration reaction of formaldehyde in water solution under neutral conditions. Two mechanisms, a concerted and a stepwise one, were considered with respect to the nucleophilic addition and the proton transfer. Preliminary molecular orbital calculations by means of polarized continuum model reaction field predicted that the hydration prefers a concerted mechanism. Because the calculated activation barriers were too high for free FMO‐MD simulations to give reactive trajectories spontaneously, a More O’Ferrall–Jencks‐type diagram was constructed from the statistical analysis of the FMO‐MD simulations with constraint dynamics. The diagram showed that the hydration proceeds through a zwitterionic‐like (ZW‐like) structure. The free energy changes along the reaction coordinate calculated by means of the blue moon ensemble for the hydration and the amination of formaldehyde indicated that the hydration proceeds through a concerted process through the ZW‐like structure, whereas the amination goes through a stepwise mechanism with a ZW intermediate. In inspection of the FMO‐MD trajectories, water‐mediated cyclic proton transfers were observed in both reactions on the way from the ZW‐like structure to the product. These proton transfers also have an asynchronous character, in which deprotonation from the nucleophilic oxygen atom (or nitrogen atom for amination) precedes the protonation of the carbonyl oxygen atom. The results showed the strong advantage of the FMO‐MD simulations to obtain detailed information at a molecular level for solution reactions.     

Kinetics of Iterative Carbohydrate Transfer to Polysaccharide Catalyzed by Chondroitin Polymerase on a Highly Sensitive Flow‐Type 27 MHz Quartz‐Crystal Microbalance

Using a highly sensitive flow‐type 27 MHz quartz crystal microbalance, we could detect a small mass change during stepwise and alternating one‐sugar transfer of glucuronic acid (GlcA) and N‐acetylgalactosamine (GalNAc) to an acceptor, catalyzed by chondroitin polymerase from Escherichia coli strain K4 (K4CP), and analyze the elongation mechanism of K4CP. K4CP was found to bind strongly to a chondroitin acceptor (K_d=0.97 μM ). Although the binding affinity and the catalytic rate constant for each monomer were considerably different, the apparent catalytic efficiency (k_cat/K_m) was similar (6.3×10⁴ M ^?1 s^?1 for GlcA transfer and 3.4×10⁴ M ^?1 s^?1 for the GalNAc transfer). This is reasonable for the smooth alternating elongation of GlcA and GalNAc on the acceptor. This is the first study to report the determination of kinetic parameters for enzymatic, alternated, sugar elongation.     

Molecular Ionics in Supramolecular Assemblies with Channel Structures Containing Lithium Ions

A novel trilithium compound, Li₃[B(C₆H₄O₂){O(CH₂CH₂O)₃CH₃}₂][N(SO₂CF₃)₂]₂ ( 1 ‐2.0), with solid‐state ionic conductivity was synthesized. The crystal structure of 1 ‐2.0 consists of the one‐dimensional ionic conduction paths. The paths were afforded as a result of the self‐assembled stacking of the component molecules of 1 ‐2.0 with channel structures containing lithium ions. In this supramolecule, one lithium ion holds the component molecules in specific positions to construct a supramolecular structure with thermally stable ionic conduction paths and the others behave as carrier ions exhibiting selective lithium‐ion conductivity. Owing to the existence of both roles for the lithium ions, this electrolyte shows selective lithium‐ion conductivity.     

Synthesis of (zinc(II) phthalocyanine)-containing cellulose derivative using phthalocyanine-ring formation reaction

2,3-Di-O-myristyl-6-O-(zinc(II) phthalocyaninyl) cellulose (5) was synthesized from cellulose (1) by five reaction steps via 6-O-(3′,4′-dicyanophenyl)-2,3-di-O-myristyl cellulose (4). The key reaction was phthalocyanine-ring formation on a cellulose backbone, that is, the reaction of compound 4 with o-phthalodinitrile in the presence of hexamethyldisilazane and zinc acetate in DMF afforded to compound 5 in 35.4 % yield. Consequently, the degree of substitution with phthalocyanine moieties of compound 5 was 0.38. The LB monolayer film of compound 5 on an indium tin oxide (ITO) electrode was found to show photocurrent generation performance at 680 nm.